本HSD系列喷雾干燥器主要提供建筑陶瓷工业、日用陶瓷工业和电瓷工业等制备压力成型的坯粉。陶瓷浆液的干燥是坯粉制备的最后一道工序，出来的坯料

获得稳定的含水量，此时粒粉的形状大小也很重要。我们的喷雾干燥塔将会通过以下性能确保理想干燥的实现:

◆低能耗;

出色的喷雾设计实现高效干燥;  

 高效低能的燃烧机;  

高效风机确保热风快速流动;

高质量不锈钢旋风除尘器的特殊结构会有效减少气压流失.

良好的保温有效防止热散失，能耗低;

可调节喷嘴和可移除喷枪，无需停止干燥塔;

使用寿命长;

故障率低。

根据不同的燃烧(天然气、燃料油等)配置不同的系统设计，应客户的需求，我们还可以实现余热发电;湿法除尘器和干滤系统可适用除尘系统。

容积选择方面，以下公式可计算干粉产量:

HSD:喷雾塔规格;X:泥浆干燥率;Y:干粉干燥率;

P:产量kg/h  P=HSD  x  X/(Y-X)

例如:HSD为9000的塔，泥浆含水率为35%，需要含水率为7%的干粉，可计算如下:

P=9000x(100-35)/((100-7)-(100-35))→P=20893 kg/h

喷雾塔规格为9000，产量为20893kg/h

Drying of the ceramics suspension is the last process of the body preparation in which to obtain constant humidity and the optimal geometry for the granules is very important. Spray dryers guarantee to realize a perfect drying by:

1. Lower energy consumption;

2. Optimal spraying design foor efficient drying;

3. Burners with high efficiency and lower consumption;

4. High efflcient fans ensure the effective air flow of the hot air;

5. Special construction of the high quality stainless steel cyclones ensures the low air pressure los's and maximum efficiency;

6. Perfect isolation to keep the heat loss and fuel consumption at minimum levels;

7.  Adjustable nozzle position and removable lances without stopping the dryer;

8. Long duty life;

9. Low failure rate.

10. Suitable system designs for different types of fuels ( natural gas, fuel-oll etc) and also cogeneratlon is possible according to customer request; Wet scrubber and dry filter systems can be applied for dedusting system.

Capaclty selection,To calculate the dried powcler production, the following formula can be uxed:

HSD: the type of spray dryer;

X: dry percentage in the dllp;

Y: dry percentage in drled powder;

P: production in kg/h

P=HSD x X/(Y-X)

FOR EXAMPLE: HSD 9000 is being used for the slip at 35% humidity and the desired humidity of the output powder is 7%.

P=9000x  (100-35)/((100-7)-(100-35))     →P=20893 kg/h

HSD is 9000; P is 20893 kg/h